Actual Rates explained: the formula from Betaflight, step by step
Actual Rates has been Betaflight's default rates model since 4.3. Its advantage: center and max are given directly in degrees per second, and expo only moves the bend. Here is the formula from the source code, what the three values do in it, and how that differs from the older Betaflight rates.
The formula from the source code
This is how Betaflight turns the stick position into a turn rate (file src/main/fc/rc.c, function applyActualRates, Betaflight 2026.6.2; from 4.3 to 2025.12 the calculation is the same):
float expof = currentControlRateProfile->rcExpo[axis] / 100.0f;
expof = rcCommandfAbs * (power5(rcCommandf) * expof + rcCommandf * (1 - expof));
const float centerSensitivity = currentControlRateProfile->rcRates[axis] * 10.0f;
const float stickMovement = MAX(0, currentControlRateProfile->rates[axis] * 10.0f - centerSensitivity);
const float angleRate = rcCommandf * centerSensitivity + stickMovement * expof;rcCommandf is the stick position from −1 to 1 (rcCommandfAbs its absolute value). In words:
- Center =
rc_rate× 10. The first part of the rate is simply stick × center: a straight line through zero with slope center. - Max =
srate× 10. Whatever exceeds center (stickMovement= max − center) is added through the expo term, which is exactly 1 at full stick. That is why the curve reaches exactly max at full deflection. - Expo =
expo÷ 100. Inside the brackets the expo term blends a straight line (rcCommandf) with a fifth power (power5), and the result is multiplied once more by the stick magnitude: with expo 0 the part above center grows with the square of the stick travel, with expo 1 with the sixth power, so flat for a long way and then steep. Center and max do not change with it.
In the Betaflight App the same values appear as Center Sensitivity, Max Rate and Expo; in the CLI they are roll_rc_rate, roll_srate, roll_expo per axis (likewise pitch_…, yaw_…) and rates_type = ACTUAL.
Worked example
Only to illustrate the formula, not a recommendation: center 70, max 670, expo 0.5 (the example profile from the demo on the home page). Plugged in, this gives:
| Stick | Turn rate |
|---|---|
| 10% | 10.0 °/s |
| 25% | 36.3 °/s |
| 50% | 114.7 °/s |
| 75% | 274.6 °/s |
| 100% | 670.0 °/s |
At 10% stick the quad turns almost only with the center part (10.0 °/s), at half travel with just over a sixth of the maximum, and only the last quarter brings the big rest. That bend is exactly what you feel on the stick as the transition from fine to fast.
High expo: 0.9 to 1.0
Expo in Betaflight goes up to 1.0: the CLI takes values from 0 to 100 for roll_expo (CONTROL_RATE_CONFIG_RC_EXPO_MAX 100 in src/main/fc/rc_controls.h). An expo close to 1.0 is not a mistake, it pushes the steepness to the end of the stick travel. Same formula, center 70 and max 670 as above, only expo changed:
| Stick | Expo 0.0 | Expo 0.5 | Expo 1.0 |
|---|---|---|---|
| 25% | 55.0 °/s | 36.3 °/s | 17.6 °/s |
| 50% | 185.0 °/s | 114.7 °/s | 44.4 °/s |
| 75% | 390.0 °/s | 274.6 °/s | 159.3 °/s |
| 90% | 549.0 °/s | 465.4 °/s | 381.9 °/s |
| 100% | 670.0 °/s | 670.0 °/s | 670.0 °/s |
With expo 1.0 the curve stays close to the center line for more than half the travel (at 50% stick 44.4 instead of 35 °/s), and almost all of the rest up to max comes in the last quarter, where you fly flips and rolls. The center stays the same: the slope at stick 0 is center with any expo. If fpvrates suggests a high expo, your fine, precision and turn zones are far away from full stick, and you use full stick only for tricks. The price: the curve gets steeper at full stick (by the formula, the rate rises almost three times as fast there with expo 1.0 as with expo 0), so flips and rolls are harder to dose finely.
How well do your rates fit your stick? The free check measures it on your blackbox log. No account, the file stays with you.
No log yet? See a real example · Turn on logging, with pictures
For your next flying day
- Betaflight App, Blackbox tab: logging device onboard flash or SD card, logging rate 1 kHz
- RC Commands, Setpoint and Gyro on, then “Save and reboot”
- Fly 3 to 5 packs of normal acro
- Then get the log off the quad and drop it into the free check
Difference to Betaflight rates
In the older models Betaflight, KISS and Raceflight, center and full stick are coupled. The Betaflight documentation: “The maximum rate and center sensitivity of Betaflight, Kiss and Raceflight rates models are altered by changing any of the three values in the model.” In Actual Rates each value stands alone: “Each parameter is completely independent of the other.” For converting the center, the 4.2 tuning notes give a rule of thumb: “To convert your old rcRate value to degrees/second, multiply it by 200. For example, an rcRate of 1.0 would be entered as a center sensitivity of 200 in ACTUAL rates.” Also: “maximum rate now will be unchanged when the user adds deadband.”
Rates converters and fpvrates
A converter translates existing values from one model into another so the curve feels as similar as possible; the Betaflight documentation links such calculators. fpvrates does something else: it measures in your blackbox log where your stick really lives, uses exactly the formula above to compute the turn rate that belongs to it, and checks on every log that the logged setpoint matches the formula. From that come suggested values for center, max and expo, not a converted old value. fpvrates reads logs with Betaflight rates too; they are measured as the closest Actual Rates, and the suggested rates come as Actual.
What expo is not
Expo does not make the center more or less sensitive: the slope at stick 0 stays center, whatever expo you choose. Expo only decides how far the calm range reaches and how steep it gets afterwards. If the center feels twitchy, lower center; if full stick feels sticky, raise max. How to approach that step by step is in the guide Setting up Betaflight rates.
Last updated: Nov 3, 2026