How to use Betaflight Blackbox Explorer (now in the App)

Blackbox Explorer shows a blackbox log as curves, moment by moment. Since Betaflight 2026.6 it lives inside the Betaflight App as the “Blackbox Viewer” tab. Here is where to find it, how to open a log and move around in it, which traces matter for your rates and what fpvrates does differently.

Got a log open? Check your rates with it for free

The free check reads the same log and shows you how you use your stick and whether your rates fit. No account, the file stays with you.

Check my log for free

Where Blackbox Explorer is now

The Explorer's project page says: “Blackbox Explorer is built into the Betaflight App as the Blackbox Viewer tab, available at app.betaflight.com and in the desktop and mobile builds. It has shipped there since the 2026.6 release.” The tab sits in the left sidebar of the app and is always there, without a connected quad and without expert mode.

The old site stays online but is no longer maintained: “blackbox.betaflight.com stays online as a frozen, unmaintained build of the last standalone release. It will not receive fixes or new features.” The old Explorer's repository will be archived on 1 December 2026, according to the same page and the Betaflight blog of 20 August 2026.

Opening a log

  1. Get the log. How to get the log off the flash memory or SD card is in the guide Blackbox logging: setup and downloading your log. If the quad is connected and has a log stored, “Download from FC” in the Blackbox Viewer fetches it directly.
  2. Open the tab. Open the Blackbox Viewer tab in the app. For a file on your computer you don't need a connected quad.
  3. Pick the file. Click “Open log file” or drag the file into the tab. Files ending in .bbl, .bfl, .cfl, .log, .txt and .json are accepted.
  4. Pick the flight. A file from the flash memory often contains several flights. “Switch log” moves between them.

The buttons in the Blackbox Viewer are labeled in English in every language. The most important ones:

  • Seek bar at the bottom: click or drag to jump to a point. What the bar shows as an overview you pick next to it: “Average motor throttle”, “Maximum stick input” or “Maximum motor differential”. With “Maximum stick input” you quickly find the moments with the biggest stick deflections.
  • Playback: the space bar starts and stops (“Play/Pause”). The arrow keys ← and → jump by 100 ms, Home and End go to the start and end of the log.
  • Zoom: Shift + ← or → zooms the curves, “Graph zoom level” at the top sets the zoom directly.
  • All keys: the keyboard icon at the top right (“Keyboard Shortcuts”) shows the full list.

The traces for your rates

For rates, three traces per axis matter. This is what they are called in the viewer:

  • RC Command [roll]: the stick position as it reaches Betaflight.
  • Setpoint [roll]: the turn rate in °/s that your rates make of that stick position in acro mode.
  • Gyro [roll]: the turn rate the quad actually flies.

Pitch and yaw have the same traces with [pitch] and [yaw]. With “Graph setup” you put them into one graph (“Add graph”, “Add field”). If gyro sits closely on setpoint, the quad does what you ask for. How setpoint relates to the stick is the rates curve; the formula is in the guide Actual Rates explained.

Reading your rates from the log

“Log header (H)” shows all header lines of the log, with a filter box. Betaflight writes the flight's rates there: rates_type, rc_rates, rc_expo, rates and rate_limits, each for roll, pitch and yaw. With Actual Rates, rc_rates × 10 is the center, rates × 10 the max and rc_expo ÷ 100 the expo. That way you can see which rates a log was flown with, even if you have changed them since. Where to change them in the app is in Setting up Betaflight rates.

More tools

  • “Sticks” shows the stick positions, “Table (T)” the values of all traces at the selected time.
  • “Statistics” shows minimum, maximum and mean per trace over the whole log.
  • “Analyser (A)” shows frequency spectra such as “Frequency”, “Freq. vs Throttle” or “Error vs Setpoint”. That is the tool for filters and PIDs, not for rates.
  • Video: if you have a video of the flight, load it as well and line it up with “Start log here”. According to the Explorer's instructions the quad beeps when arming, and that is exactly where the log starts.
  • Export: “CSV” saves the data as a table, “GPX” the GPS track.

Which question to answer with which tool, including tools outside the Explorer: see Blackbox analysis: which tool for what.

What the Explorer does not work out

The viewer shows you every moment of the flight. It does not add up how often your stick was in which range: “Statistics” only knows minimum, maximum and mean, the analyser only frequencies. Yet that distribution is exactly what rates are about. How much time do you spend in the fine range, where does your normal flying end, how much stick travel goes unused? fpvrates works that out from the same log. The free check shows you these zones, and a Tuning Pass adds suggested rates for the curve.

Last updated: Nov 11, 2026