Your rates in the simulator
You learn fastest in a simulator, but only if the curve there is the same as on your quad. Here is which sims support Actual Rates, how to carry your values over from Betaflight and what to watch out for. Everything comes from the manufacturers' announcements and manuals, as of 5 November 2026.
Which sims support Actual Rates
| Simulator | Rates models according to the manufacturer |
|---|---|
| Liftoff: FPV Drone Racing | Betaflight, Raceflight, Actual, Quick and KISS since Milestone 1.4.0 (January 2022), selectable in the flight controller settings. Update 1.7.2 in April 2026 still fixed the Quick Rates curve. Liftoff news 1.4.0 · Update 1.7.2 |
| VelociDrone | Betaflight rates plus QuickRates, Actual, KISS and FL1, with the “BetaFlight 4.2” flight controller, and three rates profiles. VelociDrone manual |
| Uncrashed | Actual since the update of 18 December 2021, Kiss, RaceFlight and QuickRates since 17 June 2024. Steam 2021 · Steam 2024 |
| TRYP FPV | Actual (already “fixed” in the patch of 13 July 2022), the default since the update of 14 December 2023. Steam 2022 · Steam 2023 |
| DRL Simulator | Its Steam announcements only mention Betaflight rates, not Actual. Steam 2017 |
Which systems the sims run on, whether they cost money and which radio you can connect as a controller is in the guide Which FPV simulator?.
How to carry your rates over
- Read your values. In the Betaflight App they are in the PID Tuning tab, per axis Center Sensitivity, Max Rate and Expo. In the CLI,
diffshows the same values differently:roll_rc_rate× 10 is the center,roll_srate× 10 the max,roll_expo÷ 100 the expo (that is howrc.ccalculates). This applies torates_type = ACTUAL. If you still fly Betaflight rates, pick the Betaflight model in the sim or convert first (Converting Betaflight rates to Actual). - Pick the same model in the sim. In Liftoff it is in the flight controller settings. In VelociDrone you first select the “BetaFlight 4.2” flight controller under General Settings, then the rates type at the top of the BetaFlight dialog in Model Setup. Where the menu is in Uncrashed and TRYP is not stated in their announcements.
- Enter the values per axis. The manufacturers do not document what the fields are called or which number format they expect. If a field shows the defaults in a different format, say 6.70 instead of 670, enter your values in the same format.
- Calibrate your radio. The VelociDrone manual recommends running the radio's stick calibration before flying, otherwise you can get spurious results in the sim. If the sim does not see your stick reach 100%, you never reach the max.
VelociDrone converts when you switch
When you change the rates type in VelociDrone, the manual says it converts your current values into the new type. The Betaflight App doesn't do that, it sets a default curve. Even so, enter the three values from Betaflight after switching in VelociDrone, then they match exactly. The three rates profiles help here: put your real rates on a profile of their own and try new ones on another.
What is the same and what isn't
The same values in the same rates model give the same curve from stick to turn rate, as long as the sim reproduces Betaflight's formula. VelociDrone says of its BetaFlight controller that it performs identically to the original. The other manufacturers say nothing specific about it. What is not the same is the flight model: the sim does not know your quad's weight, motors, props and battery. So what you ask for with the stick is the same, how the model carries it out is not quite.
If the sim has no Actual
If a sim only supports Betaflight rates, you have to convert your Actual Rates to Betaflight rates. That doesn't always work, because the two models bend the curve differently: Betaflight rates through the fraction with the super rate, Actual through a power of the stick travel. Worked out by fpvrates with the formulas from rc.c:
- A high center works: the app's default curve for Betaflight rates and its Actual counterpart (Center Sensitivity 200, Max Rate 670, Expo 0.56) are at most 3.6 °/s apart.
- A low center doesn't: for the Actual default (Center Sensitivity 70, Max Rate 670, Expo 0), RC Rate 0.35 and Rate 0.90 give the same center and almost the same max (700 °/s). But at half stick the Betaflight curve is about 120 °/s lower. The Betaflight rates that come closest over the whole stick travel are almost four times as sensitive at center instead.
The converter in the guide Converting Betaflight rates also goes in this direction: it keeps the center and full stick and shows you the largest difference between the curves. If it is large, the shape doesn't match, so check the result on the curve, especially around center.
fpvrates and the simulator
fpvrates measures your stick use in the blackbox log of your real quad, not in the sim. With a Tuning Pass the result shows the suggested rates again as Actual values under “Test in the simulator”. That way you can fly a new curve in the sim first and then on the quad.
Last updated: Nov 16, 2026