What do you need for FPV? The complete starter checklist
FPV means flying with video goggles from the drone’s point of view. For that you need more than the drone: a radio, goggles, batteries with a charger, software on your computer and, in Germany, registration and insurance. This is the complete list by component, plus the three ways into FPV and the order of your first steps. No prices and no product picks: every fact comes from the Betaflight, ExpressLRS and EdgeTX docs, from manufacturer pages or from laws and official pages, read on November 14 and 15, 2026. Which products fit is in the buying guide.
The short version
- Six things: drone, radio, goggles, batteries with a charger, software for computer and radio, and the legal duties before your first flight.
- RTF, BNF, PNP: a complete kit (RTF) has, according to a manufacturer’s glossary, drone, radio, goggles, batteries and charger in one box. BNF is only the drone with a receiver built in, you buy radio and goggles yourself. PNP has no receiver.
- Radio: ExpressLRS (ELRS) as the radio link, EdgeTX as the radio’s firmware; ExpressLRS recommends EdgeTX. The same radio plugs into the simulator over USB as a joystick.
- Goggles: analog or digital. Which goggles fit a digital transmitter is stated by the system’s manufacturer.
- Batteries: LiPo. The charger must support the battery type on the label, the connector must match the drone, and you never charge unattended.
- Software: the Betaflight App in the browser, a simulator, and for the radio the ExpressLRS Configurator or Web Flasher and EdgeTX Buddy.
- Germany: register with the Luftfahrt-Bundesamt as soon as the drone has a camera, so always. Liability insurance is mandatory. With goggles you need an observer next to you, or you fly within a model flying association, then up to 30 m without one. Elsewhere the rules differ: check with your national aviation authority.
Three ways: what each presupposes
The three ways differ in what is in the box and what you set up yourself. RTF and BNF are defined like this in the FPV glossary of the manufacturer GEPRC; that a BNF drone already has its receiver built in is also how the ExpressLRS docs put it: “a Bind-and-Fly drone with the Receiver already wired up”.
| Way | What you get | What you still need | What you do yourself |
|---|---|---|---|
| Complete kit (RTF) | According to the GEPRC glossary: drone, radio, goggles, batteries and charger. EMAX says about its kit that you fly indoors within an hour of opening the box (buying guide). | A computer for the Betaflight App and the simulator. | Charge the battery, sort out the legal duties, practice in the simulator, fly. |
| BNF plus your own parts | Only the drone, per the glossary “Drone Only (Pre-built)” with the receiver built in, without radio and goggles. | A radio with the receiver’s protocol (ELRS 2.4 GHz for the BNF whoops in the buying guide), goggles for the drone’s video system, batteries with the right connector, a charger for the battery type. | Bind the radio, check receiver and failsafe in Betaflight, set the charger to the battery type. |
| Simulator first | A radio and a simulator. | A computer the sim runs on. The platforms per sim are in the simulator comparison. | Set the radio’s USB mode to joystick. Drone, goggles, batteries and legal duties come later. |
Which whoop or kit fits which way is in the guide Buying your first FPV drone, with the manufacturers’ specifications.
The checklist by component
Every component with what you need to know before buying it, and the guide that goes deeper.
Drone: RTF, BNF, PNP and Betaflight
The three acronyms tell you how much is in the box. GEPRC’s glossary defines them like this:
| Acronym | GEPRC glossary |
|---|---|
| RTF, Ready to Fly | “Complete Kit. Includes the drone, radio controller, goggles, batteries, and charger.” |
| BNF, Bind and Fly | “Drone Only (Pre-built). Includes a fully assembled and tuned drone. Does NOT include radio or goggles.” |
| PNP, Plug and Play | “No Receiver Installed.” |
| ARF, Almost Ready to Fly | “DIY Kit. Usually includes all parts but requires you to assemble, solder, and tune the drone yourself.” |
GEPRC, FPV Glossary The acronyms come from model aviation. Horizon Hobby describes them for airplanes with the same logic: RTF is “complete and fully equipped”, a BNF has the receiver installed and you bind your compatible transmitter, a PNP includes everything “except a transmitter, receiver, battery, and charger”. Horizon Hobby, June 6, 2023 For you this means: with a BNF, what counts is which receiver is built in, because your radio has to speak the same protocol. The BNF whoops in the buying guide have an ExpressLRS 2.4 GHz receiver according to their manufacturer.
Which drone: for a start a whoop, a small drone with prop guards; why is explained in the buying guide. Betaflight is the firmware on the flight controller of many FPV drones, including the BetaFPV whoops in the buying guide; the Betaflight App “is used to configure settings for flight controllers running Betaflight Firmware”. Betaflight docs, App Whether your drone runs Betaflight and has blackbox memory is stated by the manufacturer or shown by the App; the free check here needs both, Betaflight 4.3 or newer and a blackbox. Which whoops have blackbox memory according to their makers is in Blackbox logging: setup and downloading your log.
Radio: ELRS, EdgeTX, stick mode, USB joystick
- Radio link, ELRS: ExpressLRS is the open radio protocol between radio and drone. According to the ExpressLRS docs you need either a radio with a built-in module (“a new Radio Handset with an Internal ExpressLRS module”) or an external module in the module bay, plus the receiver in the drone. Both have to be bound; how is in Bind an ELRS receiver.
- Radio firmware: EdgeTX, in the project’s words “The cutting edge open-source firmware for your R/C radio!” EdgeTX on GitHub ExpressLRS requires “OpenTX 2.3.12 or newer, or EdgeTX 2.4.0 or newer” and writes: “ExpressLRS highly recommends EdgeTX for the best experience and compatibility.” ExpressLRS, Radio Preparation The current version is EdgeTX 2.12.5 of October 17, 2026. How to change the menu language and voice pack: EdgeTX language and voice pack.
- Stick mode: which stick does what is set in EdgeTX under “Mode”: “The stick mode that will be used for the transmitter. Defined by what actions the left stick takes.” Mode 2 is listed as “Left = Rud+Thr”: left stick yaw and throttle, right stick roll and pitch. The manual names no default. EdgeTX manual, Radio Settings · Radio Setup (B&W radios) Decide on the mode before your first hour in the simulator; sim and drone use the same radio.
- Arm switch: ExpressLRS puts arming on AUX1, channel 5: “Aux1 should be used as your Arming switch, with LOW (~1000us) as disarmed and HIGH (~2000us) as armed.” ExpressLRS, Before First Flight According to ExpressLRS, EdgeTX 2.11 and newer sets “Arm using CH5” by default. In Betaflight the mode is called ARM: “Enables motors and flight stabilisation.” Betaflight docs, Modes
- USB joystick: over USB an EdgeTX radio shows up on the computer as a joystick when its “USB Mode” is set to “Joystick”; the manual says both RF modules should be off while doing so. EdgeTX manual, USB Mode · USB Joystick Which radios the manufacturers name for the sim is in the simulator comparison.
- Permitted in Germany: on 2.4 GHz wideband data transmission may use 100 mW (EIRP) (Vfg. 91/2025, row 57c); the EU firmware of ExpressLRS (EU_CE_2400) caps power at 100 mW. Bundesnetzagentur, Vfg. 91/2025 · ExpressLRS, POWERMGNT.h More in Legal radio: video and control link.
Goggles and video: analog or digital
The video transmitter (VTX) in the drone sends the camera image to your goggles. The GEPRC glossary describes it as “Divided into Analog and Digital”. GEPRC, FPV Glossary Those two terms are enough for the shopping list:
- Analog: transmitter and goggles work in the 5.8 GHz band. In Germany the limit there is 25 mW (EIRP) (Vfg. 91/2025, row 61). Vfg. 91/2025 Several analog transmitters in the buying guide do up to 350 or 400 mW according to their manufacturers; in Germany you set them to 25 mW. Which channels are legal is in Legal radio: video and control link; other countries have their own limits. The analog goggles in the buying guide have 48 channels and record to microSD according to their manufacturer.
- Digital (HD): systems are for example DJI O4 (5.725 to 5.850 GHz according to DJI), HDZero, Walksnail Avatar by Caddx and BetaFPV P1 (ArtLynk). DJI O4, specs · HDZero Race V3 · Caddx Which goggles fit which transmitter is stated by the system’s manufacturer. BetaFPV, for example, writes about P1 that it only works with goggles or receivers for this system (manufacturer statement in the buying guide). Comparing the systems is not the subject here.
- Recording: the analog goggles in the buying guide record to a microSD card; for the VR04 BetaFPV states FAT32 up to 64 GB. With a recording you can later line up flights with the blackbox log (How to use Blackbox Explorer).
Batteries and charger
- Battery type: LiPo, per GEPRC “The standard battery type for FPV. High power output but sensitive.” The label states type and cell count: LiPo charges to 4.2 V per cell, LiHV mostly to 4.35 V, such as BetaFPV’s LAVA II for the whoops in the buying guide. The charger must support that type and be set to type and cell count from the label, as Gens Ace/Tattu require. Everything about it in How to charge LiPo batteries.
- Connector: battery and drone need the same connector. The BetaFPV whoops in the buying guide take BT2.0 according to their manufacturer; what your drone needs is on its product page.
- How many: a whoop battery lasts 6 to 11 minutes according to the manufacturers (figures in the buying guide). Several batteries and a charger that charges them one after the other or at once are therefore part of the list. Complete kits include battery and charger per the glossary, with a BNF you buy both.
- Safety: never charge unattended, say Gens Ace/Tattu, SkyRC, ISDT, ToolkitRC and BetaFPV; Gens Ace/Tattu suggest a LiPo sack while charging. BetaFPV says a pack should stay fully charged for 3 days at most; the charger’s storage mode takes it to about 3.8 V per cell: How to store and dispose of LiPos.
Accessories
- Spare propellers in the size your drone’s manufacturer specifies; for some whoops in the buying guide it is listed there.
- LiPo bag: Gens Ace/Tattu suggest a LiPo sack while charging and, for a pack that has become hot, a fireproof container such as a LiPo safety bag. Gens Ace/Tattu, LiPo operating instructions (PDF)
- USB cable with data lines: the Betaflight docs: “Connect your flight controller to your computer via USB.” Betaflight, Setup Guide A charge-only cable will not do; what else can go wrong when connecting is in Betaflight not connecting.
- microSD card for recording in the goggles, see goggles.
- Transport: the Aquila16 kit includes a bag according to BetaFPV; with separate parts you buy one. For the batteries, on the road too: do not store loose packs together, their terminals can touch (Gens Ace/Tattu), more under transport.
- Tools: what the manufacturers include is listed on the product page under package contents. We did not find a general manufacturer statement on which tools a whoop needs.
Software: Betaflight App, simulator, ELRS and EdgeTX
- Betaflight App: this is where you configure the flight controller. The current version 2026.6.2 runs as a web app at app.betaflight.com and, according to the docs, needs a Chromium browser with WebUSB and WebSerial, such as Chrome or Edge; programs for Windows, macOS, Linux and Android are at downloads.betaflight.com. Betaflight docs, App How to connect: Betaflight not connecting. Do not reflash the firmware right away, the docs advise against it for ready-made drones: Flash Betaflight firmware.
- Simulator: Liftoff, VelociDrone, Uncrashed, TRYP and FPV.SkyDive, the only free one among them, with platforms and radios in the simulator comparison. How to get your rates into the sim: Rates in the simulator.
- ExpressLRS Configurator or Web Flasher: per the docs “two ways to build and flash ExpressLRS”, the Configurator being the recommended one. ExpressLRS, Installing Configurator · Configurator releases · Web Flasher Plus the ExpressLRS Lua script on the radio’s SD card, which you bind and configure with (Bind an ELRS receiver). If the receiver sits directly on the flight controller via SPI, ExpressLRS runs as part of Betaflight and is updated with Betaflight (built-in receiver).
- EdgeTX Buddy: the website buddy.edgetx.org flashes the radio and sets up the SD card; according to the manual only in a Chromium browser. EdgeTX manual Step by step in EdgeTX language and voice pack.
Legal duties in Germany
This applies in Germany before you fly. Everything with law and official page is in Flying FPV legally in Germany, this is the short version; not legal advice. Quotes from German legal texts are our translations. In other countries, check your national aviation authority.
- Registration: you must register if you operate a drone of 250 g or more, or one with a camera; the regulation names an aircraft equipped with a sensor able to capture personal data, unless it complies with the toy safety directive (Art. 14(5)). For a drone under 250 g with a camera the LBA says registration as a UAS operator is required, but no exam for the EU competency certificate. Cost: 20 € for a natural person according to the LBA. The registration number goes on every drone. Regulation (EU) 2019/947 · LBA FAQ registration · LBA, registration
- Insurance: the keeper of an aircraft must hold liability insurance to cover their liability for damages. § 43(2) LuftVG For registration the LBA asks for your insurer and policy number, so insure first.
- A1/A3 competency certificate: online training and exam at the LBA. Exception: according to the LBA it is not mandatory in subcategory A1 for class C0 drones and drones with a maximum take-off mass below 250 g. LBA, remote pilots
- Observer: the remote pilot keeps the aircraft in VLOS at all times, unless in follow-me mode or with an unmanned aircraft observer (Art. 4(1)(d)). With goggles you cannot see the drone yourself, so you need that observer. The EASA says the regulation “allows you to fly without keeping direct eye contact with the drone, provided you have a person next to you, a UA observer, keeping direct visual contact with the drone”. Flying without one is possible, according to the LBA, only within the model flying associations DMFV and MFSD, then up to 30 m above ground. Regulation (EU) 2019/947 · EASA FAQ 116511 · LBA FAQ
- Radio: set the video transmitter to a permitted channel with 25 mW EIRP (Legal radio: video and control link). Location: check it on the official map dipul before you fly.
Your first steps, in this order
- Simulator before the first battery is empty. Connect the radio over USB as a joystick (USB mode “Joystick”), install the sim, decide on your stick mode. The sim makers recommend a radio over a gamepad: for Liftoff, game controllers are “a slight handicap”, VelociDrone writes “We do not recommend gamepads for flying racing drones”. Liftoff support · VelociDrone manual Which sim runs on your computer is in the simulator comparison.
- Legal duties: insurance first, then registration with the LBA, then the competency certificate, unless you stay under 250 g in A1. Order and links in the checklist of the legal guide.
- Charge the batteries: type and cell count from the label, the balance plug as well on packs with several cells, 1C at most unless the battery maker states otherwise, and stay with it: How to charge LiPo batteries.
- Bind: the first number of the ExpressLRS version must match on radio and receiver. Then set the binding phrase on both, or put the receiver into bind mode and choose “Bind” in the Lua script; a solid LED on the receiver means it is bound. All of it in Bind an ELRS receiver.
- Check Betaflight: connect the App and back up the settings first (Betaflight backup with diff all). In the Receiver tab the bars must follow your sticks, the arm switch sits on AUX1. Then set up and test failsafe; the Betaflight docs demand it before the first flight: “On the bench, without propellers: confirm that Failsafe triggers as configured.” And: “If any of these tests fail, do not attempt to fly.” Betaflight, Setup Guide How: Set up Betaflight failsafe.
- First flight: after all tests the Betaflight docs recommend “a quick hover test”. Betaflight, Setup Guide With goggles in Germany: observer next to you (within an association up to 30 m without), video transmitter at 25 mW. If the drone won’t arm, Betaflight tells you why: Quad won’t arm: all arming flags. Two flight modes are worth knowing: Betaflight’s default mode “does not stabilize the multicopter around the roll and the pitch axes”, the docs call it “Rate” or “Acro” mode. In angle mode the drone flies level when you leave the sticks centered. Betaflight docs, Modes
After your first flights: measure your rates
If your drone runs Betaflight 4.3 or newer with a blackbox and you fly acro, it can record every flight. Load the log here for free, no account, the file stays in your browser: the free check shows how much stick travel you really use and how steep your curve gets towards the edge. How to enable the blackbox and get the log: Blackbox logging: setup and downloading your log.
Sources
As of November 15, 2026. Checked that day: Betaflight App and firmware 2026.6.2 (September 16, 2026), ExpressLRS 4.1.0 (July 17, 2026), EdgeTX 2.12.5 (October 17, 2026), ExpressLRS Configurator 1.8.5 (November 14, 2026), each the latest release. Nothing here was tested on a device; procedures and terms come from docs, manufacturer pages, laws and official pages. Manufacturer names are sources, not recommendations.
- Betaflight docs: Betaflight App, Setup Guide, Modes; downloads.betaflight.com.
- ExpressLRS docs: Getting Started, Radio Preparation, Before First Flight, Installing Configurator; source code POWERMGNT.h.
- EdgeTX: README, manual Radio Settings, Radio Setup, USB Mode, USB Joystick, Update with Buddy.
- Manufacturers: GEPRC, FPV Glossary, Horizon Hobby, Acronyms and Assembling of RC Airplanes, Gens Ace/Tattu, LiPo operating instructions (PDF), DJI O4 Air Unit, HDZero Race V3 VTX, Caddx; product specifications of BetaFPV, EMAX and RadioMaster in the buying guide (November 7, 2026).
- Simulators: Liftoff support, VelociDrone manual, more in the simulator comparison.
- Laws and authorities (November 5, 2026): Implementing Regulation (EU) 2019/947, EASA FAQ 116511, § 43 LuftVG, LBA, registration, LBA, FAQ registration, LBA, FAQ drones, LBA, remote pilots, Bundesnetzagentur, Vfg. 91/2025, dipul.
Last updated: Nov 16, 2026